PRE-ORDER (Deliv. Jul 14) - 1 Premium Chlorine Granules 1KG & 1 Water 50 Test Strips (3 in 1)

$30.99
*Please note - our pre-order dates are estimates quoted to us from our factory and can be subject to short delays. Any delays on your order will be communicated to you in advance via email.

Combination of Chlorine and Test Strips

Chlorine:
Use Wave Chlorine Granules 55% for the disinfection of spa and swimming pool water. The granules are completely soluble and have little effect on pH. They also contain a stabiliser to protect against loss of chlorine to sunlight, making them ideal for daily chlorination.

Application - Add WAVE Chlorine Granules 55% into 10 litres of freshwater using a clean plastic container and mix carefully. Slowly pour the solution into the spa or pool water near to the return inlets and rinse out the container thoroughly.

 

As a general guide, to increase a 1500L spa from 0ppm to 5ppm you will need to add at least 12g of Chlorine Granules. A heaped teaspoon holds approximately 8g of chlorine granules. 

Dose Rate - Chlorine Granules 55% to 10 cubic metres of spa or pool water. This daily dose rate is offered as a general guide for private spas and pools. Heavily used spas and pools or those maintained at higher temperatures may require increased dosage. Test for actual requirements by using a poolside test kit - adjusting the dose rate as necessary to maintain a chlorine level of 1-3 ppm or mg/litre.

pH Control - To obtain maximum benefit from WAVE Chlorine Granules 55%, the pH of the water should be maintained around 7.4 and between 7.2 and 7.8 at all times. Chlorine is less effective at high pH ie. above 7.8.


3 in 1 Test Strips:
Perfect for the residential user, Wave test strips are manufactured in the UK and subject to the same rigorous quality control as other pool testing products. Supplied in pots of 50 tests, the procedure is exactly as expected - dip, shake off the excess and compare to the colour chart printed onto the pot. 

Test strips available: 3-way test strip providing testing on chlorine, pH, Alkalinity.
  • Perfect for the residential user, Wave test strips are manufactured in the UK and subject to the same rigorous quality control as other pool testing products
  • Supplied in pots of 50 tests, the procedure is exactly as expected - dip, shake off the excess and compare to the colour chart printed onto the pot.

SHIPPING POLICY

Orders under $199.99 - $9.99 Postage

Orders Over $200 - Free Postage

RETURNS POLICY


If you are not happy with your purchase, then we would be happy for you to return the item within 14 days of the purchase date. Please enclose a note giving the reason for the return and on receipt, and we will issue you a full refund (including shipping charge) within five working days of receipt of your returned item.

We also offer free collections for faulty or unwanted items, subject to courier availability.

Please note that return shipping charges are non-refundable. Please contact us if you have any queries about this process.

Any returned items must reach us in unopened, “new” condition with all original packaging present.

As stated in distance selling regulations, we cannot accept returns of Spas or Spa Accessories if you have opened the seal, with the exception of items that are faulty on arrival.

In the unlikely event that your order or items within it are damaged, you may return them to us for a full refund or exchange. You must notify us within 7 working days. We will also refund your return postage. Please return your items to the address below depending upon your proximity to the relevant warehouses:

In the event that you do not wish to post this to us, you can request a collection service with us by emailing enquiries@wavedirect.co.uk

Other Customers Loved The Following...

Recently viewed