PRE-ORDER ANY HOT TUB AND RECIEVE AN EXTRA $50 OFF
PRE-ORDER (Delivery mid-April 2021) - 1 Premium Chlorine Granules 1KG & 1 Water 50 Test Strips (3 in 1)

    PRE-ORDER (Delivery mid-April 2021) - 1 Premium Chlorine Granules 1KG & 1 Water 50 Test Strips (3 in 1)

    $30.99
      DESCRIPTION
      Combination of Chlorine and Test Strips

      Chlorine:
      Use Wave Chlorine Granules 55% for the disinfection of spa and swimming pool water. The granules are completely soluble and have little effect on pH. They also contain a stabiliser to protect against loss of chlorine to sunlight, making them ideal for daily chlorination.

      Application - Add WAVE Chlorine Granules 55% into 10 litres of freshwater using a clean plastic container and mix carefully. Slowly pour the solution into the spa or pool water near to the return inlets and rinse out the container thoroughly.

       

      As a general guide, to increase a 1500L spa from 0ppm to 5ppm you will need to add at least 12g of Chlorine Granules. A heaped teaspoon holds approximately 8g of chlorine granules. 

      Dose Rate - Chlorine Granules 55% to 10 cubic metres of spa or pool water. This daily dose rate is offered as a general guide for private spas and pools. Heavily used spas and pools or those maintained at higher temperatures may require increased dosage. Test for actual requirements by using a poolside test kit - adjusting the dose rate as necessary to maintain a chlorine level of 1-3 ppm or mg/litre.

      pH Control - To obtain maximum benefit from WAVE Chlorine Granules 55%, the pH of the water should be maintained around 7.4 and between 7.2 and 7.8 at all times. Chlorine is less effective at high pH ie. above 7.8.


      3 in 1 Test Strips:
      Perfect for the residential user, Wave test strips are manufactured in the UK and subject to the same rigorous quality control as other pool testing products. Supplied in pots of 50 tests, the procedure is exactly as expected - dip, shake off the excess and compare to the colour chart printed onto the pot. 

      Test strips available: 3-way test strip providing testing on chlorine, pH, Alkalinity.
      • Perfect for the residential user, Wave test strips are manufactured in the UK and subject to the same rigorous quality control as other pool testing products
      • Supplied in pots of 50 tests, the procedure is exactly as expected - dip, shake off the excess and compare to the colour chart printed onto the pot.
      SHIPPING
      Pre Order & In-Stock: $19.99 for large items / $9.99 for small items and are shipped with either UPS or TNT (48 Hour) service

      RELATED PRODUCTS

      BACK TO TOP