No Products in your bag
*Please note - our pre-order dates are estimates quoted to us from our factory and can be subject to short delays. Any delays on your order will be communicated to you in advance via email.
Use WAVE™ pH Reducer to lower the pH of swimming pool water and to reduce the alkalinity. The pH should be correctly maintained to ensure bather comfort and the protection of the pool and its equipment.
Dose Rate 100g of WAVE™ pH Reducer per 10 cubic metres of water.
Ideally the pH of the water should be maintained around 7.4. If the pH rises to, or above 7.8, add WAVE™ pH Reducer into 10 litres of fresh water, using a clean plastic container and mix carefully. Slowly pour the solution into the pool or spa water close to the return inlets and rinse out the container thoroughly.
After 24 hours, recheck the pH and repeat the treatment dose as necessary.
|Pre-Order & In-Stock:||Free Shipping on all Hot Tubs / $19.99 for large items / $9.99 for small items and are shipped with either UPS or TNT (48 Hour) service|